Mechanisms, gears, flywheels, governors and vibration: how machines move and how forces flow through them.
Key ideas
- Grübler's criterion gives the degrees of freedom of a planar mechanism.
- Gear trains change speed and torque; power stays the same apart from losses.
- A flywheel smooths speed fluctuation within a cycle; a governor controls mean speed.
- Resonance happens when forcing frequency equals natural frequency.
Formula sheet
Grübler's criterionGear ratioNatural frequency (spring–mass)Damping ratioFlywheel energy fluctuationBelt tension ratioCritical speed of a shaft
Grübler's criterion
F=3(n-1)-2j-h
n = links, j = lower pairs, h = higher pairs
Gear ratio
i=\frac{N_1}{N_2}=\frac{T_2}{T_1}
T = number of teeth
Natural frequency (spring–mass)
\omega_n=\sqrt{\frac{k}{m}},\qquad f_n=\frac{1}{2\pi}\sqrt{\frac{k}{m}}
Damping ratio
\zeta=\frac{c}{2\sqrt{km}}
Flywheel energy fluctuation
\Delta E=I\,\omega^2 C_s,\qquad C_s=\frac{\omega_{max}-\omega_{min}}{\omega}
Belt tension ratio
\frac{T_1}{T_2}=e^{\mu\theta}
Critical speed of a shaft
N_c=\frac{60}{2\pi}\sqrt{\frac{g}{\delta}}
δ = static deflection at the disc
Working on a project in Theory of Machines? We can guide you step by step.
Ask on WhatsApp