Engineering Calculators

Free calculators to check your hand calculations and ANSYS results. Results update as you type.

Unit converter

Reynolds number

Defaults: water at 25 °C in a 50 mm pipe.

Beam deflection

Uses δ = PL³/48EI and δ = PL³/3EI.

Stress and factor of safety

Standard atmosphere (ISA)

Valid from sea level to 20 km.

Gear ratio

How to use these engineering calculators

These calculators help you check hand calculations, assignments and simulation results in seconds. Enter your values in consistent units and compare the answer with your own working. In projects, they are useful to confirm that an ANSYS result is in the right range before you trust it.

Reynolds number

Reynolds number tells whether a flow is laminar or turbulent: Re = ρVD / μ, where ρ is density, V is velocity, D is the characteristic length (pipe diameter) and μ is dynamic viscosity. For flow in a circular pipe, Re below about 2,300 is usually laminar and above about 4,000 is usually turbulent. Read more on the Fluid Mechanics notes.

Beam deflection

For a simply supported beam with a central point load, maximum deflection is δ = PL³ / 48EI, where P is the load, L the span, E the Young’s modulus and I the second moment of area. See the Strength of Materials notes for other load cases.

Tips for correct results

  • Convert all inputs to one unit system (SI is safest) before calculating
  • Check that material properties match your actual material
  • Use calculator results as a sanity check for FEA, not as a replacement

Frequently asked questions

Are these calculators free?
Yes, all calculators are free and work on mobile.

Can I use them to verify ANSYS results?
Yes. Comparing a simple hand calculation with the FEA result is a good way to catch setup mistakes.

Scroll to Top