How solid parts carry load: stress, strain, bending, torsion and buckling. Almost every FEA project you do is checking the numbers this subject teaches you to estimate by hand.
Key ideas
- Stress is internal force per unit area; strain is change in length per unit length.
- Within the elastic limit, stress is proportional to strain (Hooke's law).
- Bending creates tension on one side of the neutral axis and compression on the other.
- Long slender columns fail by buckling well before the material yields.
Formula sheet
Normal stress and strain
P = axial load, A = cross-section area, L = original length
Hooke's law
E = Young's modulus
Relation between elastic constants
G = shear modulus, K = bulk modulus, ν = Poisson's ratio
Bending equation
M = bending moment, I = second moment of area, y = distance from neutral axis, R = radius of curvature
Torsion equation
T = torque, J = polar moment of area, θ = angle of twist
Second moment of area
Principal stresses (2D)
Von Mises equivalent stress
This is the stress ANSYS shows as Equivalent (von-Mises) Stress
Euler buckling load
L_e = effective length: L (both ends pinned), 2L (one fixed, one free), L/2 (both fixed), L/√2 (fixed–pinned)
Thin cylinder stresses
Hoop stress is twice the longitudinal stress
Working on a project in Strength of Materials? We can guide you step by step.
Ask on WhatsApp