Aircraft Structures: Key Formulas and Notes

Thin-walled beams, shear flow and buckling of skins and stiffeners: how lightweight airframes carry load.

Key ideas

  • Aircraft structures are thin-walled, so shear flow is used instead of shear stress alone.
  • Closed sections are much stiffer in torsion than open sections.
  • Thin skin panels buckle early; stiffeners carry the compressive load after that.
  • The shear centre is where a load causes bending without twisting.

Formula sheet

Shear flow

q=\tau\,t

Bredt–Batho (closed thin-walled torsion)

T=2A_e\,q,\qquad \frac{d\theta}{dz}=\frac{T}{4A_e^2G}\oint\frac{ds}{t}

A_e = area enclosed by the wall mid-line

Unsymmetric bending

\sigma_z=\frac{M_xI_{yy}-M_yI_{xy}}{I_{xx}I_{yy}-I_{xy}^2}\,y+\frac{M_yI_{xx}-M_xI_{xy}}{I_{xx}I_{yy}-I_{xy}^2}\,x

Open-section shear flow

q_s=-\frac{S_y}{I_{xx}}\int_0^s t\,y\,ds\quad(\text{symmetric section})

Plate buckling stress

\sigma_{cr}=\frac{k\pi^2E}{12(1-\nu^2)}\left(\frac{t}{b}\right)^2

Margin of safety

MS=\frac{\text{allowable stress}}{\text{applied stress}\times FS}-1

Working on a project in Aircraft Structures? We can guide you step by step.

Ask on WhatsApp

← All subjects

Scroll to Top