Friction stir welding (FSW) joins two metal parts without melting them. A rotating tool with a shoulder and a pin is pushed into the joint line between two plates. Friction between the tool and the plates produces heat, the metal around the pin becomes soft, and the rotating pin stirs the softened material from both plates together. When it cools, the two plates become one solid joint. Because the metal never turns liquid, FSW avoids many defects of fusion welding, such as porosity and solidification cracks, which is why it is widely used for aluminium alloys.
The shape of the tool pin decides how the material flows and how heat is produced. In this project, the standard circular (round) tool is treated as the existing design, and three new pin profiles are modelled and compared with it under identical conditions.

Tool Designs Modelled in Creo
All four tools were modelled in Creo 2.0 and assembled with two aluminium plates placed side by side along the weld line:
- Circular tool – the existing cylindrical pin design used as the reference.
- Hexagonal tool – a six-sided pin that adds flat faces to push material around.
- Tapered tool – a pin whose diameter reduces towards the tip.
- Truncated tool – a cone-shaped pin with its tip cut flat.


Materials Used
| Part | Material | Yield strength |
|---|---|---|
| Plates | Aluminium alloy 6061 | 276 MPa |
| Tool | Steel | 250 MPa |
The same material properties were used for every tool, so any change in the results comes only from the pin geometry.
ANSYS Model and Mesh
The Creo assembly was imported into ANSYS Workbench. The tool and both plates were meshed together so that contact between the pin and the plates could be captured.


Static Structural Analysis
For the structural study, the tool was given a rotational velocity of 1000 rpm and the plates were held with fixed supports. The study reports total deformation, equivalent stress and strain for each tool.

| Result | Circular | Hexagonal | Tapered | Truncated |
|---|---|---|---|---|
| Total deformation (mm) | 0.15348 | 0.14856 | 0.13069 | 0.14598 |
| Equivalent strain | 0.0064619 | 0.0059849 | 0.0036967 | 0.0056653 |

The equivalent stress for each tool is also calculated and compared in the project report.
Steady-State Thermal Analysis
The thermal study shows how heat spreads from the tool into the plates. The boundary conditions were:
- Circular tool temperature: 400 °C
- Tool bottom surface: 250 °C
- Plate bottom surfaces: 25 °C
- Convection on plate surfaces: 3e-5 W/mm²·°C with 25 °C ambient

| Result | Circular | Hexagonal | Tapered | Truncated |
|---|---|---|---|---|
| Total temperature (°C) | 448.93 | 493.97 | 487.53 | 469.24 |
| Total heat flux (W/mm²) | 26.119 | 27.799 | 24.214 | 26.355 |
| Heat flux X (W/mm²) | 8.5421 | 7.8787 | 12.689 | 7.0949 |
| Heat flux Y (W/mm²) | 25.915 | 26.658 | 20.623 | 25.585 |
| Heat flux Z (W/mm²) | 9.9065 | 8.2993 | 2.6388 | 7.9413 |

The results show that pin shape changes both the peak temperature and the direction in which heat flows into the plates. Which pin profile gives the best balance of low deformation, controlled stress and suitable heating is discussed in detail in the project report.
Real-World Applications
- Joining aluminium panels in aircraft, rail coaches and ship decks
- Battery trays and body panels in electric vehicles
- Selecting tool pin profiles for FSW machines
- Academic study of solid-state welding and heat generation
Related Projects
Explore more design and analysis projects on similar topics:
- Thread Milling Cutter Design and Analysis: Rectangular, Triangular and Rhombic Profiles
- Hydraulic Scissor Lift Design and Analysis for an 80 kN Load
- Pneumatic Sheet Metal Bending and Cutting Machine: Design and Analysis for Aluminium and Galvanized Iron Sheets (SolidWorks and ANSYS)
- Portable Grain Packing Machine Design and Analysis: Steel vs Grey Cast Iron vs Aluminium Alloy (SolidWorks and ANSYS)
What You Get
- Design files: Creo 2.0 models of 4 FSW tools and Al 6061 plate assembly
- Analysis files: ANSYS static structural (1000 rpm) and steady-state thermal analysis
- Project document: complete report with methodology, results and conclusion
- Class explanation: a session that explains what was done in the project, step by step, so you can understand and present it confidently
Who Is This Project For?
This project suits B.Tech and B.E. final year students, diploma students looking for a strong design and analysis project, and M.Tech students who need a base model they can extend for their thesis. It is also useful for anyone who wants to learn How pin profile affects deformation, strain, temperature and heat flux in FSW on a real engineering problem instead of a textbook example.
Frequently Asked Questions
What is friction stir welding?
It is a solid-state joining process where a rotating tool softens and stirs the metal of two plates together without melting them.
Which tool shapes are compared?
Circular (existing), hexagonal, tapered and truncated pin tools, all with the same materials and boundary conditions.
What boundary conditions were used?
A tool speed of 1000 rpm for the structural study, and 400 °C tool, 250 °C tool bottom, 25 °C plate bottom and convection for the thermal study.
Which tool performs best?
The comparison and the recommended tool profile are explained in the project report.
Get the Friction Stir Welding Tool Project
Want this project for your final year, mini project or M.Tech work? Message us with your university, branch and deadline, and we will share the exact scope, files and report format.
Enquire about this project on WhatsApp or use the enquiry form on our home page. Browse more mechanical projects or 60+ mechanical engineering project ideas.
Interested in this project? Get the details, files and guidance from our team.
Enquire on WhatsApp