Vibration Test Fixture Design and Analysis for Shaker Tables: Cube, L-Shape and T-Shape Fixtures in Al-2024 and AZ31B (ANSYS)

Electronic units in cars, aircraft, satellites and defence equipment must survive years of vibration. Before they are approved, they are tested on an electrodynamic shaker table that reproduces road, flight or launch vibration. The test item cannot be bolted directly to the shaker, so a metal vibration fixture is placed in between. A good fixture passes the vibration to the test item faithfully: it must be stiff, light and strong, and its own natural frequencies must stay above the test frequency range so that it does not resonate and distort the test. This project designs three common fixture types and compares two lightweight alloys.

Cube vibration test fixture 3D model

Types of Vibration Fixtures

Fixtures come in many shapes depending on the test item and the axes being tested. A cube fixture lets an item be tested in three axes by rotating the cube. An L-shape fixture mounts an item on a vertical face for horizontal testing, and a T-shape fixture provides a mounting plate supported by a central web. Stiffening ribs are added to raise stiffness without adding much weight.

L-shape vibration test fixture 3D model
L-shape fixture
T-shape vibration test fixture 3D model
T-shape fixture

About the Project

The three fixtures are modelled in SolidWorks and analysed in ANSYS Workbench. In the static structural analysis, each fixture is fixed at its base and loaded with a force of 1.6 × 10⁵ N (160 kN). A modal analysis then calculates the first six natural frequencies. Two lightweight materials are compared: Al-2024 aluminium alloy and AZ31B magnesium alloy.

Software Used

  • SolidWorks: cube, L-shape and T-shape fixture modelling
  • ANSYS Workbench: static structural and modal analysis

Analysis Results

Vibration fixture 160 kN force boundary condition
Boundary conditions
Cube vibration fixture total deformation
Cube deformation
L-shape vibration fixture total deformation
L-shape deformation

Key Results (Preview)

Fixture / MaterialDeformation (mm)Stress (MPa)Safety factorMode 1 (Hz)
Cube / AZ31B0.073895162.451.6989542.28
Cube / Al-20240.0726241372.2262558.91
L-shape / AZ31B0.23941166.41.52651702.9
L-shape / Al-20240.15463159.861.90791760.6
T-shape / AZ31B0.08381179.4473.2726758.48
T-shape / Al-20240.05391470.244.3422782.55

The T-shape fixture is the strongest in the static analysis, while the L-shape fixture has by far the highest natural frequencies. How these are balanced, and the final fixture and material choice, are explained in the project report.

Real-World Applications

  • Automotive electronics: ECUs, sensors and infotainment units.
  • Aerospace and defence: avionics boxes and satellite components.
  • Consumer electronics: reliability testing of products in transport.

Key Concepts Covered

  • Vibration testing on electrodynamic shakers.
  • Fixture natural frequency and why it must stay above the test range.
  • Lightweight alloys: aluminium vs magnesium.

Project Workflow

  1. Study shaker testing and fixture types.
  2. Model cube, L-shape and T-shape fixtures in SolidWorks.
  3. Apply 160 kN and solve the static analysis for both materials.
  4. Run the modal analysis for all fixtures.
  5. Compare and discuss the results in the report.

Why This Project Matters

Vibration testing is essential in automotive, aerospace and electronics industries. This project is an excellent final-year choice for mechanical and aerospace students interested in structural dynamics and testing.

Related Projects

Explore more design and analysis projects on similar topics:

What You Get

  • Design files: SolidWorks models of the cube, L-shape and T-shape fixtures (with STEP files)
  • Analysis files: ANSYS Workbench static structural and modal analysis files for all three fixtures and both materials
  • Project document: complete report with methodology, results and conclusion
  • Class explanation: a session that explains what was done in the project, step by step, so you can understand and present it confidently

Who Is This Project For?

This project suits B.Tech and B.E. final year students, diploma students looking for a strong design and analysis project, and M.Tech students who need a base model they can extend for their thesis. It is also useful for anyone who wants to learn vibration testing, fixture design and modal analysis in ANSYS on a real engineering problem instead of a textbook example.

Frequently Asked Questions

What is a vibration test fixture?

It is a metal structure placed between a shaker table and the test item, used to transmit vibration accurately to the item during testing.

Which fixture shapes are studied?

Cube, L-shape and T-shape fixtures.

Which materials are compared?

Al-2024 aluminium alloy and AZ31B magnesium alloy.

Why is the fixture natural frequency important?

If the fixture resonates within the test frequency range, it distorts the vibration reaching the test item, so its natural frequencies should be above the test range.

Get the Vibration Test Fixture Project

Want this project for your final year, mini project or M.Tech work? Message us with your university, branch and deadline, and we will share the exact scope, files and report format.

Enquire about this project on WhatsApp or use the enquiry form on our home page. Browse more mechanical projects or 60+ mechanical engineering project ideas.

Interested in this project? Get the details, files and guidance from our team.

Enquire on WhatsApp

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top