There are four main types of gears based on how the shafts are arranged: spur and helical gears for parallel shafts, bevel gears for intersecting shafts, and worm gears for shafts that are neither parallel nor intersecting. This guide explains each type of gear with its working, advantages and real-life uses, so you can answer exam questions and choose the right gear for a project.
What is a gear?
A gear is a toothed wheel that transmits motion and power from one shaft to another by meshing its teeth with another gear. Because the teeth lock together, gears give a positive drive: there is no slip, so the speed ratio stays exact. This is why gears are used in vehicles, machine tools, clocks, wind turbines and aircraft engines.
Classification of gears
| Shaft arrangement | Types of gears |
|---|---|
| Parallel shafts | Spur gear, helical gear, double helical (herringbone) gear, rack and pinion, internal gear |
| Intersecting shafts | Bevel gears: straight, spiral, zerol and miter |
| Non-parallel, non-intersecting shafts | Worm and worm wheel, hypoid gear, crossed helical gear |
1. Spur gear
Spur gears have straight teeth cut parallel to the shaft axis. They are the simplest and most common type of gear.
- Working: the whole width of a tooth comes into contact at once.
- Advantages: simple to design and manufacture, high efficiency, no axial thrust on bearings.
- Disadvantages: noisy at high speed because the teeth engage suddenly.
- Uses: gearboxes of washing machines, clocks, lathe gear trains, low-speed machines.
2. Helical gear
Helical gears have teeth cut at an angle (the helix angle) to the shaft axis.
- Working: contact starts at one end of the tooth and spreads gradually across it.
- Advantages: smoother and quieter than spur gears; carry higher loads.
- Disadvantages: produce axial (thrust) load, so thrust bearings are needed.
- Uses: automobile gearboxes, turbines, compressors, high-speed machinery.
3. Double helical (herringbone) gear
A double helical gear has two sets of helical teeth with opposite hands side by side. The axial thrust of one set cancels the other, so these gears combine the smooth running of helical gears with no net thrust. They are used in heavy power transmission such as rolling mills, ship propulsion and large turbines.
4. Rack and pinion
A rack is a straight bar with teeth; the pinion is a small gear that meshes with it. Together they convert rotary motion into linear motion (or the reverse). Uses: car steering systems, lathe carriage movement and lifting mechanisms.
5. Internal gear
An internal (annular) gear has teeth cut on the inside of a ring. The meshing pinion rotates in the same direction as the ring, and the drive is compact. Internal gears are the outer ring of planetary (epicyclic) gear trains used in automatic transmissions and wind turbines.
6. Bevel gears
Bevel gears have teeth cut on a cone and connect shafts that intersect, usually at 90°.
- Straight bevel: straight teeth; simple but noisy at high speed.
- Spiral bevel: curved teeth; smoother and stronger.
- Zerol bevel: curved teeth with zero spiral angle.
- Miter gears: a pair of equal bevel gears giving a 1:1 ratio at 90°.
Uses: differential of a vehicle, hand drills, marine drives and machine tools.
7. Worm and worm wheel
A worm looks like a screw and meshes with a worm wheel at 90°. It gives a very high speed reduction in one stage, often 20:1 to 100:1.
- Advantages: large reduction, compact, quiet; many designs are self-locking, so the load cannot drive the worm backwards.
- Disadvantages: lower efficiency due to sliding contact, and more heat.
- Uses: lifts and hoists, conveyors, tuning keys of guitars, steering gear.
8. Hypoid gear
Hypoid gears look like spiral bevel gears, but the pinion axis is offset from the gear axis. The offset lets the drive shaft sit lower, which is why hypoid gears are used in the rear axle of cars and trucks.
Comparison of common gear types
| Gear | Shafts | Noise | Axial thrust | Typical use |
|---|---|---|---|---|
| Spur | Parallel | High at speed | None | Simple gearboxes |
| Helical | Parallel | Low | Yes | Automobile gearboxes |
| Herringbone | Parallel | Low | Cancelled | Heavy power drives |
| Bevel | Intersecting | Medium | Yes | Differentials |
| Worm | 90°, non-intersecting | Low | Yes | Lifts, conveyors |
Gear ratio formula with example
Gear ratio = Number of teeth on driven gear ÷ Number of teeth on driver gear = N₁ ÷ N₂, where N₁ and N₂ are the speeds of the driver and driven gears.
Example: A driver gear with 20 teeth runs at 1,500 rpm and meshes with a driven gear of 60 teeth. Gear ratio = 60 ÷ 20 = 3. Driven speed = 1,500 ÷ 3 = 500 rpm. Ignoring losses, the output torque is three times the input torque.
Important gear terms
- Pitch circle: the imaginary circle on which two gears roll without slipping.
- Module (m): pitch circle diameter ÷ number of teeth, in mm. Meshing gears must have the same module.
- Pressure angle: the angle of the line of action; 20° is the most common standard.
- Addendum and dedendum: tooth height above and below the pitch circle.
- Backlash: small clearance between meshing teeth to avoid jamming.
More formulas are on our Theory of Machines and Design of Machine Elements pages.
Gear materials
Gears are made from cast iron (cheap, good wear resistance), alloy steels (high strength, often case-hardened), bronze (for worm wheels to reduce friction) and plastics such as nylon (quiet, light loads). The choice depends on load, speed, noise and cost.
FAQs on types of gears
Which gear is used for parallel shafts?
Spur, helical, double helical (herringbone) gears and rack and pinion are used for parallel shafts.
Which gear gives the highest speed reduction?
The worm and worm wheel, which can give reductions of 20:1 to 100:1 in a single stage.
Why are helical gears quieter than spur gears?
Helical teeth engage gradually along their length, while spur teeth engage across the full width at once, which causes impact noise.
Which gear is used in a car differential?
Bevel gears are used in the differential, and many rear-wheel-drive cars use hypoid gears in the final drive.
Interested in this project? Get the details, files and guidance from our team.
Enquire on WhatsApp