The main difference between a 2 stroke and a 4 stroke engine is that a 2 stroke engine completes one power cycle in one crankshaft revolution, while a 4 stroke engine needs two revolutions. As a result, 2 stroke engines are lighter and give more power for their size, while 4 stroke engines are more fuel-efficient, cleaner and longer-lasting. This guide explains how both engines work and compares them point by point.
What is a stroke?
A stroke is one movement of the piston from top dead centre (TDC) to bottom dead centre (BDC), or back. One crankshaft revolution (360°) equals two strokes.
Working of a 4 stroke engine
A 4 stroke engine completes its cycle in four piston strokes, which take two crankshaft revolutions (720°). Inlet and exhaust valves are opened and closed by a camshaft.
- Suction (intake) stroke: the piston moves from TDC to BDC with the inlet valve open. A petrol engine draws in an air-fuel mixture; a diesel engine draws in only air.
- Compression stroke: both valves close and the piston moves up, compressing the charge. This raises its pressure and temperature.
- Power (expansion) stroke: near TDC, a spark plug ignites the mixture (petrol engine) or fuel is injected into the hot air and self-ignites (diesel engine). The burning gases push the piston down. This is the only stroke that produces work.
- Exhaust stroke: the exhaust valve opens and the rising piston pushes the burnt gases out.
Working of a 2 stroke engine
A 2 stroke engine completes the same four events in two strokes, within one crankshaft revolution (360°). Small 2 stroke petrol engines usually use ports in the cylinder wall, opened and closed by the piston itself, instead of valves.
- First stroke (upward): the piston moves up and compresses the charge above it. At the same time, the space below the piston in the crankcase expands and draws in a fresh air-fuel mixture through the inlet port.
- Second stroke (downward): the spark ignites the compressed charge and the piston is pushed down (power). As it moves down, it first uncovers the exhaust port so burnt gases leave, then uncovers the transfer port so the fresh charge from the crankcase enters and pushes out the remaining exhaust gases. This process is called scavenging.
Difference between 2 stroke and 4 stroke engine
| Point | 2 stroke engine | 4 stroke engine |
|---|---|---|
| Power strokes | One every crankshaft revolution | One every two crankshaft revolutions |
| Valves | Usually ports, no valve mechanism | Inlet and exhaust valves with camshaft |
| Power-to-weight ratio | Higher | Lower |
| Flywheel | Lighter (more uniform torque) | Heavier |
| Fuel efficiency | Lower, as some fresh charge escapes with exhaust | Higher |
| Thermal and volumetric efficiency | Lower | Higher |
| Lubrication (small petrol engines) | Oil mixed with fuel or injected | Separate oil sump and pump |
| Emissions | Higher, more smoke | Lower |
| Noise and wear | Noisier, wears faster | Quieter, longer life |
| Design and cost | Simple, fewer parts, cheaper | Complex, more parts, costlier |
| Typical uses | Chainsaws, outboard motors, small generators, older scooters, very large marine diesel engines | Cars, motorcycles, trucks, generators, tractors |
Advantages and disadvantages
2 stroke engine
- Advantages: twice as many power strokes, light and compact, simple construction, can run in any position.
- Disadvantages: higher fuel and oil consumption, more pollution, shorter life.
4 stroke engine
- Advantages: better fuel economy, lower emissions, smoother and quieter, longer engine life.
- Disadvantages: heavier, more parts, higher cost, less power for the same size.
Why most new two-wheelers use 4 stroke engines
Stricter emission norms such as India’s Bharat Stage (BS) standards and the need for better mileage have made 4 stroke engines the standard for modern motorcycles and scooters. Large 2 stroke diesel engines are still used in ships, where their high power and slow speed suit direct propeller drive.
Petrol vs diesel in brief
Both 2 stroke and 4 stroke engines can be petrol (spark ignition, SI) or diesel (compression ignition, CI). Petrol engines work on the Otto cycle and ignite the charge with a spark plug. Diesel engines work on the Diesel cycle and use high compression to self-ignite injected fuel. Revise the cycle formulas on our Thermodynamics notes.
FAQs
Which is more powerful, a 2 stroke or a 4 stroke engine?
For the same size, a 2 stroke engine produces more power because it has a power stroke every revolution. A 4 stroke engine is more efficient and durable.
Why is a 2 stroke engine less fuel-efficient?
During scavenging, part of the fresh air-fuel mixture escapes through the exhaust port along with the burnt gases.
Does a 2 stroke engine have valves?
Small 2 stroke petrol engines use ports instead of valves. Some large 2 stroke diesel engines use exhaust valves.
How many revolutions does a 4 stroke engine take for one cycle?
Two crankshaft revolutions (720°) for one complete cycle.
Interested in this project? Get the details, files and guidance from our team.
Enquire on WhatsApp