Gas Turbine Blade Design with NACA 2412, 4412 and 8412: Static, Thermal and CFD

The turbine blade is the part of a gas turbine that extracts energy from the hot, high-pressure gas leaving the combustor. Many blades are fixed around a disc, and together they turn the shaft that drives the compressor and produces power. Turbine blades work in one of the harshest environments in engineering: very high temperature, high gas pressure and huge centrifugal force from rotation. They are often the part that limits how hot and how fast an engine can run. The airfoil shape of the blade decides how much lift it produces from the gas flow, and therefore how much work it extracts. This project compares three NACA airfoil shapes for a gas turbine blade.

Gas turbine blade 3D model with NACA airfoil

Airfoils Studied

Three four-digit NACA airfoils with the same 12 percent thickness but different camber are used:

  • NACA 2412: 2 percent camber, a gently curved profile.
  • NACA 4412: 4 percent camber, a moderately curved profile.
  • NACA 8412: 8 percent camber, a strongly curved profile.

The airfoil coordinates are imported into the sketch, the profile is extruded to form the blade with a 100 mm chord, and a root block is added for mounting on the disc.

NACA airfoil profile sketch in SolidWorks
Airfoil profile

About the Project

The three blades are modelled in SolidWorks and analysed in three ways:

  • Static structural analysis: the root is fixed, a gas pressure of 60 MPa is applied on the blade together with rotational velocity, to find deformation, stress and strain.
  • Steady-state thermal analysis: hot gas convection at 939.22 °C (film coefficient 3.37 × 10⁻⁵ W/mm²·°C) with the root at 28 °C, to find temperature and heat flux.
  • CFD analysis in ANSYS Fluent: airflow around each airfoil to find the coefficients of lift and drag, pressure and velocity.

Two materials are compared: steel as the existing material (yield 250 MPa) and the titanium alloy Ti-15Mo (yield 480 MPa).

Turbine blade mesh in ANSYS
Mesh

Software Used

  • SolidWorks: airfoil-based blade modelling
  • ANSYS Workbench: static structural and steady-state thermal analysis
  • ANSYS Fluent: CFD of airflow around the airfoils

Analysis Setup

Turbine blade 60 MPa pressure boundary condition
Boundary conditions

Static Structural Results

AirfoilMaterialDeformation (mm)Equivalent stress (MPa)Strain
NACA 2412Steel0.8421490.00085
NACA 2412Ti-15Mo0.8261560.00090
NACA 4412Steel0.7491570.00101
NACA 4412Ti-15Mo0.7361670.001
NACA 8412Steel0.541850.00102
NACA 8412Ti-15Mo0.5401980.001
Turbine blade equivalent stress
Equivalent stress

Thermal Results

AirfoilMaterialMax temperature (°C)Heat flux (W/mm²)
NACA 2412Steel837.030.8962
NACA 2412Ti-15Mo813.671.2958
NACA 4412Steel837.050.84436
NACA 4412Ti-15Mo813.781.2213
NACA 8412Steel837.060.95607
NACA 8412Ti-15Mo813.891.3523
Turbine blade temperature distribution
Temperature
NACA 4412 airfoil CFD velocity contour
CFD velocity

The safety factors, the lift and drag coefficients from CFD, and the final choice of airfoil and material are explained in the project report.

Real-World Applications

  • Aircraft jet engines: high-pressure and low-pressure turbine stages.
  • Power plants: industrial gas turbines for electricity generation.
  • Marine propulsion: gas turbines in ships.
  • Turbochargers: turbine wheels driven by exhaust gas.

Key Concepts Covered

  • NACA four-digit airfoils: camber, thickness and chord.
  • Lift and drag: how blade shape affects energy extraction.
  • High-temperature design: heat transfer into the blade.
  • Titanium alloys: strength at low weight.
  • CFD of airfoils: domain, inlet, outlet and wall setup.

Project Workflow

  1. Collect airfoil coordinates for NACA 2412, 4412 and 8412.
  2. Model the three blades with roots in SolidWorks.
  3. Run static analysis at 60 MPa with rotation for steel and Ti-15Mo.
  4. Run thermal analysis with hot gas convection.
  5. Run Fluent CFD for lift and drag and compare all results in the report.

Why This Project Matters

Turbine blades are at the heart of jet engines and power plants. This project shows how airfoil shape and material work together, which makes it an excellent choice for aeronautical and mechanical students.

Related Projects

Explore more design and analysis projects on similar topics:

What You Get

  • Design files: SolidWorks models of the three NACA airfoil blades (2412, 4412, 8412) with root, built from airfoil coordinates
  • Analysis files: ANSYS static structural and steady-state thermal files, and Fluent CFD files for all three airfoils
  • Project document: complete report with methodology, results and conclusion
  • Class explanation: a session that explains what was done in the project, step by step, so you can understand and present it confidently

Who Is This Project For?

This project suits B.Tech and B.E. final year students, diploma students looking for a strong design and analysis project, and M.Tech students who need a base model they can extend for their thesis. It is also useful for anyone who wants to learn airfoil-based blade modelling in SolidWorks, ANSYS analysis and Fluent CFD on a real engineering problem instead of a textbook example.

Frequently Asked Questions

Which airfoils are used for the turbine blade?

Three NACA four-digit airfoils: NACA 2412, NACA 4412 and NACA 8412, all with 12 percent thickness but different camber.

Which materials are compared?

Steel as the existing material and the titanium alloy Ti-15Mo.

What loads are applied?

A gas pressure of 60 MPa with rotational velocity for static analysis, and hot gas convection at 939.22 °C for thermal analysis.

What does the CFD analysis calculate?

It calculates the coefficients of lift and drag along with pressure and velocity around each airfoil.

Get the Gas Turbine Blade NACA 2412, 4412, 8412 Project

Want this project for your final year, mini project or M.Tech work? Message us with your university, branch and deadline, and we will share the exact scope, files and report format.

Enquire about this project on WhatsApp or use the enquiry form on our home page. Browse more mechanical projects or 60+ mechanical engineering project ideas.

Interested in this project? Get the details, files and guidance from our team.

Enquire on WhatsApp

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top