Laws of Thermodynamics: Zeroth, First, Second and Third Law Explained

There are four laws of thermodynamics. The zeroth law defines temperature, the first law says energy is conserved, the second law says heat cannot be fully converted into work and sets the direction of natural processes, and the third law says the entropy of a perfect crystal approaches zero at absolute zero. This guide explains each law with its statement, equation, solved example and real-life applications.

Laws of thermodynamics at a glance

Law In simple words Key result
Zeroth law If two bodies are each in thermal equilibrium with a third, they are in equilibrium with each other Basis of temperature measurement
First law Energy can neither be created nor destroyed Q − W = ΔU
Second law No engine can convert all heat into work; heat flows naturally from hot to cold ηCarnot = 1 − TL/TH; entropy of an isolated system never decreases
Third law Entropy of a perfect crystal approaches zero as temperature approaches 0 K Absolute zero cannot be reached in a finite number of steps

Zeroth law of thermodynamics

Statement: If body A is in thermal equilibrium with body C, and body B is also in thermal equilibrium with body C, then A and B are in thermal equilibrium with each other.

Meaning: bodies in thermal equilibrium have the same temperature. This is why a thermometer (body C) can compare the temperatures of two other bodies. The law was named “zeroth” because it was recognised after the first and second laws but is more basic than both.

First law of thermodynamics

Statement: Energy can neither be created nor destroyed; it can only change from one form to another. For a closed system:

Q − W = ΔU

where Q is heat supplied to the system, W is work done by the system and ΔU is the change in internal energy (all in kJ). For a system undergoing a complete cycle, ΔU = 0, so the net heat supplied equals the net work done (∮δQ = ∮δW).

Solved example: A gas in a cylinder receives 500 kJ of heat and does 200 kJ of work on the piston. Change in internal energy ΔU = Q − W = 500 − 200 = 300 kJ (increase).

Consequence: a perpetual motion machine of the first kind (PMM1), which produces work without any energy input, is impossible.

Applications: energy balance of engines, compressors, turbines, boilers and heat exchangers using the steady flow energy equation (SFEE).

Second law of thermodynamics

The first law tells us how much energy is converted; the second law tells us in which direction a process can happen and how much work is possible.

Kelvin–Planck statement

It is impossible to build a heat engine that operates in a cycle, exchanges heat with a single reservoir and produces an equal amount of work. In other words, no heat engine can have 100% efficiency. A machine that broke this rule would be a perpetual motion machine of the second kind (PMM2).

Clausius statement

It is impossible to build a device that operates in a cycle and transfers heat from a colder body to a hotter body without any external work. This is why a refrigerator needs a compressor and electricity.

The two statements are equivalent: violating one means violating the other.

Carnot efficiency

The maximum possible efficiency of a heat engine working between a hot reservoir at TH and a cold reservoir at TL (both in kelvin) is:

ηCarnot = 1 − TL / TH

Solved example: An engine works between 800 K and 300 K. Maximum efficiency = 1 − 300/800 = 0.625 = 62.5%. Any real engine between these temperatures will have a lower efficiency.

Entropy

Entropy (S) is a measure of the disorder of a system and of the energy that is not available for work. For any process in an isolated system, ΔS ≥ 0: entropy increases in real (irreversible) processes and stays constant only in ideal reversible processes.

Applications: efficiency limits of power plants and IC engines, refrigerator and heat pump COP, and the design of turbines and compressors.

Third law of thermodynamics

Statement: The entropy of a perfect crystalline substance approaches zero as its temperature approaches absolute zero (0 K).

Meaning: it gives a reference point for measuring absolute entropy, and it implies that absolute zero cannot be reached in a finite number of steps.

Applications: calculation of absolute entropies in chemistry and the study of materials at very low (cryogenic) temperatures.

Important terms

  • System: the quantity of matter or region under study; surroundings are everything outside it.
  • Closed system: no mass crosses the boundary, energy can. Open system: both mass and energy cross. Isolated system: neither crosses.
  • Heat engine: converts heat into work in a cycle. Refrigerator and heat pump: use work to move heat from cold to hot.

Revise all formulas on our Engineering Thermodynamics notes and Heat Transfer notes. To see thermodynamics at work in an engine, read 2 stroke vs 4 stroke engine.

Thermal engineering project? We have CFD and thermal analysis projects on heat exchangers, radiators, boilers, fins and heat sinks. See 100+ mechanical projects for students or send your enquiry.

FAQs on the laws of thermodynamics

Why is it called the zeroth law?

It was stated after the first and second laws, but since it is more fundamental, it was numbered zero so it comes before them.

What is the first law of thermodynamics in simple words?

Energy is conserved: the heat added to a system equals the increase in its internal energy plus the work it does.

Why can no engine be 100% efficient?

The second law requires every heat engine to reject some heat to a colder reservoir, so not all heat input can become work.

Can we reach absolute zero?

No. According to the third law, absolute zero cannot be reached in a finite number of steps.

Interested in this project? Get the details, files and guidance from our team.

Enquire on WhatsApp

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top